Every data point
has a defined scope.

Results of testing concrete block specimens with 7.62×51 mm AP and .30 Caliber M2 AP ammunition.

The listed shots for Specimens 2–5 are recorded as no perforation and compliant in the report.

Results concern the analysed specimens. Conditioning was omitted at the customer’s request. Velocity references are TS EN 1522, June 2001, and NIJ 0101.04; this is not general NIJ IV product certification.

Easywallbrick concrete specimen; reference to STANAG 4569 Level III and 7.62×51 AP with tungsten-carbide core.

22 shot records; the report specifies 930 ± 20 m/s. The result column uses the code PP, which is not reinterpreted here.

This is not a certificate issued by NATO. Non-standard specimens and firing distance were used at the customer’s request, and the witness plate was waived. It does not replace product certification.

Examination of dimensions, compressive strength, density, water absorption and thermal properties of a concrete masonry unit specimen.

Specimen: 50 × 25 × 12.5 cm concrete masonry unit. The report lists TS EN 772 series, TS EN 1745 and TS EN 13820 methods.

Applies only to the tested specimen. Not a substitute for product certification. This is not a ballistic test report.

Technical report in Turkish and English, with appendices, on Easy Wall Brick block/brick wall elements.

Material tests cover compressive strength, splitting tensile strength, water absorption and unit weight.

The bullet-resistance assessment relies on a Tekno Poligon report supplied by the company. The firing tests are not presented as having been performed by ITU.